[j-nsp] one-way lsp
Thomas Salmen
tsalmen at orcon.net.nz
Tue Dec 27 18:00:10 EST 2005
Is this required under the label-switched-path config? (is it even
configurable?) Surely this is configured for a named path only? I was under
the impression that configuring a named path was not required at all, and
the IGP could simply be relied on.
/t
>
> Hi,
> Use a loose path since you are using loopbacks
>
> mpls {
> label-switched-path pe1 {
> to xx.xxx.8.14 LOOSE;
> }
> interface fe-0/0/0.100;
> }
>
> HTH
>
More information about the juniper-nsp
mailing list