[j-nsp] one-way lsp

Jan Andersson H (AL/EAB) jan.h.andersson at ericsson.com
Tue Dec 27 18:05:57 EST 2005


I might have been to quick here :-/
The J-series config is probably OK (is your iBGP session up? You might
need to use "local-address")
I'm even more losy on the E-series config but is RSVP and MPLS enable
properly on all valid interfaces? 
//Jan

-----Original Message-----
From: Thomas Salmen [mailto:tsalmen at orcon.net.nz] 
Sent: den 28 december 2005 00:00
To: Jan Andersson H (AL/EAB); 'jnsp list'
Subject: RE: [j-nsp] one-way lsp



Is this required under the label-switched-path config? (is it even
configurable?) Surely this is configured for a named path only? I was
under the impression that configuring a named path was not required at
all, and the IGP could simply be relied on.

/t

> 
>  Hi,
> Use a loose path since you are using loopbacks
> 
> mpls {
>     label-switched-path pe1 {
>         to xx.xxx.8.14 LOOSE;
>     }
>     interface fe-0/0/0.100;
> }
> 
> HTH
> 




More information about the juniper-nsp mailing list