[j-nsp] NAT support
Harshit Kumar
harshit at juniper.net
Fri Feb 4 13:59:44 EST 2005
(watch for word wrap)
Docs are your best friend :)
http://www.juniper.net/techpubs/software/junos/junos63/swconfig63-servic
es/download/nat-config.pdf
(you can find a similar 7.0 doc too)
Harshit
-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Steve Leibrock
Sent: Friday, February 04, 2005 8:34 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] NAT support
Hello, I am in the process of trying to configure one way NAT on a
Juniper M20. I have a device that sits on a 10.1.1.0 fe-0/1/0 interface
and I want to have 3 hosts on this network defined to NAT to 3 public
addresses and reachable thru the fe-0/1/1 interface which has public
ip's.. Does anyone know how to set the config for this.
The way I would like to set it up is as follows;
10.1.1.11 - 67.63.13.11
10.1.1.12 - 67.63.13.12
10.1.1.13 - 67.63.13.13
Thanks in advance
Steve
Steve Leibrock, CTO
Datum Global Solutions
50 Cragwood Road, Suite # 308
South Plainfield, New Jersey 07080
(908) 668-8808 x230
www.datumglobal.com
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list