[j-nsp] multiple LSPs

Harshit Kumar harshit at juniper.net
Wed Feb 9 02:47:30 EST 2005


This should answer your questions ...(watch for word wrap in URLs)

http://www.juniper.net/techpubs/software/junos/junos70/swconfig70-mpls-a
pps/html/mpls-signaled-config23.html

You can configure load balancing using

http://www.juniper.net/techpubs/software/junos/junos70/swconfig70-mpls-a
pps/html/mpls-signaled-config24.html

 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of The Drifter
Sent: Tuesday, February 08, 2005 10:29 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] multiple LSPs

We have 3x equal-cost IGP paths as shown below from router A-D:

(A)  ------ 5 ------ (B)  ------5----  ( D)
(A)  ---------10 -------------------    ( D)
(A)   ------ 4------ (C)  -----6------ ( D)

Next-Hop BGP is always router (D) loopback address. So we have multiple
LSPs 
to the same next-hop bgp addresss. Will 3xLSPs load share the traffic
going 
to D?

Regards,
W.

_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar - get it now! 
http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list