[j-nsp] ERX 6-0-0 radius accounting

[Mark Loveley]

Thanks Jagdish I assume you meant something like:-
aaa authentication ppp default none
aaa accounting ppp default none

as the command options are:-
(config)#aaa accounting ?
 acct-stop     Configure AAA to send acct-stop
 atm1483       Configure ATM Broadband RAS client characteristics
 commands      Apply this accounting to user commands of specified
privilege level
 duplication   Configure duplicate accounting
 exec          Apply this accounting to CLI access in general
 interval      Configure the interval between accounting updates
 ip            Configure IP Broadband RAS client characteristics
 ppp           Configure PPP Broadband RAS client characteristics
 radius-relay  Configure RADIUS Relay Broadband RAS client characteristics
 suppress      Suppress accounting operation
 tunnel        Configure tunnel Broadband RAS client characteristics

#aaa authentication ?
 atm1483       Configure ATM Broadband RAS client characteristics
 enable        configure privilege authentication
 ip            Configure IP Broadband RAS client characteristics
 login         Apply this authentication to vty users
 ppp           Configure PPP Broadband RAS client characteristics
 radius-relay  Configure RADIUS Relay Broadband RAS client characteristics
 tunnel        Configure tunnel Broadband RAS client characteristics

However as we use radius to auth/acct our users this stops them
logging/ and us knowing whos logging in for how long.
The messages are still being sent to our servers, Though if they are
from before I applied the commands I'm not sure.

Is there a way to filter the attributes that the ERX sends to the
radius accounting servers?

Thanks
Mark