[j-nsp] Half Duplex Routing Engine m40?
Richard A Steenbergen
ras at e-gerbil.net
Wed Feb 16 15:57:32 EST 2005
FYI, collisions on the fxp1 aren't displayed in the cli, but you can take
a look at your stats from the shell with:
> netstat -I fxp1
Name Mtu Network Address Ipkts Ierr Opkts Oerr Coll
fxp1 1514 <Link> 00.a0.a5.12.27.9e 62449090 0 64510642 0 76067
unit 0 1500 4 62449090 0 64510643 0 0
This is on a box that does a fair amount of netflow export too, so in the
grand scheme of things it isn't too bad. If you're really doing a lot of
traffic on your fxp1 you may want to look in to why.
You can check your traffic levels in real time like this (from shell):
> netstat -I fxp1 1
input fxp1 output
packets errs bytes packets errs bytes colls
33 0 11364 25 0 4234 0
31 0 9881 32 0 5963 0
23 0 8658 18 0 2443 0
24 0 9735 18 0 3644 0
27 0 7732 37 0 27701 0
45 0 9895 42 0 5795 0
27 0 8268 19 0 3775 0
17 0 7716 15 0 2993 0
14 0 4895 10 0 1312 0
33 0 9395 40 0 28271 0
29 0 8720 29 0 4916 0
21 0 7893 12 0 1816 0
23 0 10774 16 0 3362 0
21 0 6914 20 0 3530 0
26 0 8606 27 0 12259 0
33 0 12551 26 0 5167 0
19 0 7114 15 0 2851 0
17 0 7211 12 0 1618 0
27 0 7943 21 0 3737 0
etc
--
Richard A Steenbergen <ras at e-gerbil.net> http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
More information about the juniper-nsp
mailing list