[j-nsp] Juniper Routers Automation Tools

[Stefan Fouant]

Hi,

You might want to check out Dorado 
(http://www.doradosoftware.com/index.html) or MetaSolv 
(http://www.metasolv.com).  They were the only vendors we could identify 
who had Cisco / Juniper based provisioning tools for large scale 2547 / 
L2VPN deployments.  Of course that was almost 2 years ago, not sure who 
plays in that market space anymore.

Other than that... how good are you at Perl? ;)

Stefan Fouant
Senior Network Engineer
UUNET / MCI

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net 
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Akella 
Vardhana Srikant
Sent: Monday, January 24, 2005 12:34 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Juniper Routers Automation Tools

Hi All,
Can somebody tell me if there are any tools available for automating the
Juniper Router configuration? For example, In case I need to configure
100 VPN's in Juniper M40e Router, whether any tool is available for
achieving this target?

Regards,

Srikant