[j-nsp] RSVP or LDP

[Andrey A. Ryazanov]

RSVP will NOT do rate-limiting for you. The bandwidth you specify for RSVP LSP is just 
for calculation of best path (RSVP will not permit reservation over maximum reserved 
bandwidth for an interface).

You should rate-limit at LER on both sides of your LSP.

Andrey Ryazanov
Digital Network JSC
+7 095 723 8332 ext. 203

---------- Original Message -----------
From: Orhan DЭz <orhand at kocsistem.com.tr>
To: <juniper-nsp at puck.nether.net>
Sent: Fri, 1 Jul 2005 22:00:12 +0300
Subject: [j-nsp] RSVP or LDP

> Hello,
> 
> We would like to rate limit MPLS VPN. Our aim is to limit the one LSP to 2Mbps.
> 
> Which is the best way to do?
> 
> LDP and rate limiting on the ingress port?
> 
> Or to use RSVP?
> 
> Kindly
> 
> Orhan DЭz
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
------- End of Original Message -------