[j-nsp] RSVP or LDP

[Nils Swart]

Hi Andrey,

> RSVP will NOT do rate-limiting for you. The bandwidth you specify for RSVP LSP is just for calculation of best path (RSVP will not permit reservation over maximum reserved bandwidth for an interface).
> You should rate-limit at LER on both sides of your LSP.
> Andrey RyazanovDigital Network JSC+7 095 723 8332 ext. 203
> ---------- Original Message -----------From: Orhan D-z <orhand at kocsistem.com.tr>To: <juniper-nsp at puck.nether.net>Sent: Fri, 1 Jul 2005 22:00:12 +0300Subject: [j-nsp] RSVP or LDP
>> Hello,> > We would like to rate limit MPLS VPN. Our aim is to limit the one LSP to 2Mbps.> > Which is the best way to do?> > LDP and rate limiting on the ingress port?> > Or to use RSVP?> > Kindly> > Orhan D-z> > _______________________________________________> juniper-nsp mailing list juniper-nsp at puck.nether.net> http://puck.nether.net/mailman/listinfo/juniper-nsp------- End of Original Message -------
> _______________________________________________juniper-nsp mailing list juniper-nsp at puck.nether.nethttp://puck.nether.net/mailman/listinfo/juniper-nsp
>

With regards to RSVP LSP ingress policers, see also :

http://www.juniper.net/techpubs/software/junos/junos72/swconfig72-mpls-apps/html/mpls-miscellaneous-config13.html#1035826

-Nils