[j-nsp] 12-FE-TX/RJ21

[Tony Stout]

Here are the list of "approved" patch panels Juniper sent us last year:

> Vendor		Part Number
> -----------------------------
> 
> Ortronics       OR-838045326
> Hubbell         MCC48100BT19
> AMP             1116732-1
> 
> 
> 
http://www.ampnetconnect.com/products/displayspartgroups.asp?comID=90&Co
mSubId=88&Compsubname=Telecommunications+Room&SysCom=1&Partgroupname=10%
2F100BASE%2DT+Category+5+Patch+Panel&partOrSysID=314

> On Jul 5, 2005, at 6:12 PM, Jonas Frey wrote:
> 
> > Hi,
> >
> > does anyone know what kind of patch panel is used to connect to a
> > Px-12FE-TX card? I seem to be unable to locate a 12 Port 100Mbps
RJ21
> > female patch panel. I'd use a hydra cable too, but again i cant find

> > any
> > with a RJ21 female connector.
> > Is there anyone on this list using this setup who could tell me any
> > supplier to get these parts at?
> >
> > Regards,
> > Jonas
> >
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/juniper-nsp


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp