[j-nsp] 12-FE-TX/RJ21

[Guy Davies]

Hi Jonas,

Yes, they generally come as 24 port or 48 port panels with 2 or 4 RJ-21
connectors on the rear.  Last time I needed one (in the UK), I just used
Google.co.uk and put in RJ-21 to RJ-45 patch panel.  Some places also
describe the RJ-21 as a "telco" connection.  They're available for
around GBP100 for a 24 port unit.

Rgds,

Guy

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Jonas Frey
> Sent: 05 July 2005 17:13
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] 12-FE-TX/RJ21
> 
> 
> Hi,
> 
> does anyone know what kind of patch panel is used to connect 
> to a Px-12FE-TX card? I seem to be unable to locate a 12 Port 
> 100Mbps RJ21 female patch panel. I'd use a hydra cable too, 
> but again i cant find any with a RJ21 female connector. Is 
> there anyone on this list using this setup who could tell me 
> any supplier to get these parts at?
> 
> Regards,
> Jonas
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 

This e-mail is private and may be confidential and is for the intended recipient only.  If misdirected, please notify us by telephone and confirm that it has been deleted from your system and any copies destroyed.  If you are not the intended recipient you are strictly prohibited from using, printing, copying, distributing or disseminating this e-mail or any information contained in it.  We use reasonable endeavours to virus scan all e-mails leaving the Company but no warranty is given that this e-mail and any attachments are virus free.  You should undertake your own virus checking.  The right to monitor e-mail communications through our network is reserved by us.