[j-nsp] 12-FE-TX/RJ21

[Jonas Frey]

Hi Daniel,

thats exactly what i was looking for, thanks!
I could find RJ21 patch panels easily, but none with female connectors.
Apparently these are pretty uncommon, no idea why juniper still uses
these then...

Regards,
Jonas

On Tue, 2005-07-05 at 18:24, Daniel Verlouw wrote:
> We're using several from Molex, RJ21 female connectors on the back.  
> Unless they changed them, I believe these are the ones we bought at RS  
> Components:
> 
> http://www.rs-components.nl/cgi-bin/bv/browse/Module.jsp? 
> BV_SessionID=@@@@1772768254.1120580301@@@@&BV_EngineID=ccciaddfddlfiddce 
> feceefdffhdgmo.0&cacheID=nlnetscape&3298033190=3298033190&stockNo=340937 
> 1
> 
> -Daniel.
> 
> On Jul 5, 2005, at 6:12 PM, Jonas Frey wrote:
> 
> > Hi,
> >
> > does anyone know what kind of patch panel is used to connect to a
> > Px-12FE-TX card? I seem to be unable to locate a 12 Port 100Mbps RJ21
> > female patch panel. I'd use a hydra cable too, but again i cant find  
> > any
> > with a RJ21 female connector.
> > Is there anyone on this list using this setup who could tell me any
> > supplier to get these parts at?
> >
> > Regards,
> > Jonas
> >
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/juniper-nsp