[j-nsp] cspf to secondary loopback

[Rafal Szarecki (WA/EPO)]

1. use no-cspf keworks under LSP definition, and creat ERO manualy

or,

2. establish two LSP toward the same primary IP address, and use policy under [routing-option forwarding-table] to select which LSP should be use for particular packets/traffic.

Rafal Jan Szarecki JNCIP#135

Senior Consultant - Datacom Networks
Ericsson Poland EPO/S/D
Office:	+48 22 6916635
ECN:	837 6635
Mobile:	+48 602418971



> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of Stefan Mink
> Sent: Wednesday, July 27, 2005 9:54 AM
> To: Harry Reynolds
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] cspf to secondary loopback
> 
> 
> Hi,
> 
> Harry Reynolds wrote:
> > Working as designed. A secondary loopback address is not 
> advertised into
> > the TED. 
> 
> it seems not even to appear in the link state database
> although there is an OSPF route in the routing table =:-O
> How can this happen?
> 
> Are there any solutions to this problem?
> AFAIK it is not possible to use lo0.1 etc. On a Cisco you
> can simply configure Loopback1...
> 
>    tschuess
>              Stefan
> -- 
> Stefan Mink, Schlund+Partner AG (AS 8560)
> Primary key fingerprint: 389E 5DC9 751F A6EB B974  DC3F 7A1B 
> CF62 F0D4 D2BA
>