[j-nsp] Minimal config for MPLS between Cisco and Juniper?

[Erdem Sener]

Well,

  You should not "try" things on a live network, unless it's an
emergency and/or absolutely necessary.

  I would suggest going with martini tunnels and digging the docs with it.

 Cheers,
 Erdem

On 6/10/05, Joe McGuckin <joe at via.net> wrote:
> If I wanted to create a l2 vpn between a FE dot1q vlan on a Juniper and a FE
> dot1q vlan on a Cisco, what's the minimal config.
> 
> Do any of these statements have the potential of disturbing an existing
> network?  E.g. If I simply enable ldp, rsvp or mpls, could that create
> problems?
> 
> Thanks,
> 
> Joe
> --
> 
> Joe McGuckin
> 
> ViaNet Communications
> 994 San Antonio Road
> Palo Alto, CA  94303
> 
> Phone: 650-213-1302
> Cell:  650-207-0372
> Fax:   650-969-2124
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 


-- 

-erdem