[j-nsp] Hidden L3VPN Routes

[Gary Tate]

You LDP destination and bgp peering address need to be the same.  
Normally this would be the loopback.  It would be a great help if you 
could send your protocols configurations and a show route extensive for 
ht peering address of the iBGP session

Gary

Chris Staudt wrote:

>Hi again, I am now facing a similar problem again.
>I Have an active LDP Session, I do see the next Hop BGP Address in the
>inet.3 table as long as the BGP Session to my route-reflector is active
>(and therefore there is still no route...) . As soon as it comes up there
>are only a few routes left (alsways the same but I don't see a connection
>between them)in the inet.3 table.
>The LDP Path for the BGP next hop is always there but it is no longer
>importet into the inet.3 table. Do you have any Ideas?
> inet.3 then says 10 active, 0 hidden, 0 holddown.
>What conditions have to be met for a route to be importet into inet.3
>besides an existing LDP entry for the destination?
>
>
>
>i.V.
> 
>  
>