[j-nsp] OSPF route flapping

Javier Gallardo (DF/TEM) javier.gallardo at ericsson.com
Fri Jun 17 19:14:10 EDT 2005


Hi,

192.168.2.54 is the interfase for LSA originating router and 0.164.219.227 is the routerid for the same router.

I had add lsa tracing to traceoptions flags and sent a portion of logfile  to you.

Thanks for your help.
//Javier

-----Original Message-----
From: Harry Reynolds [mailto:harry at juniper.net]
Sent: Viernes, 17 de Junio de 2005 05:48 p.m.
To: Javier Gallardo (DF/TEM)
Cc: juniper-nsp at puck.nether.net
Subject: RE: [j-nsp] OSPF route flapping


Who is 192.168.2.54  and 0.164.219.227? The trace makes it seem that 192.168.2.54 is flushing the LSA. I suggest you also add lsa tracing, and if not already doing so, trace at 192.168.2.54.

Cheers


> -----Original Message-----
> From: Javier Gallardo (DF/TEM) [mailto:javier.gallardo at ericsson.com] 
> Sent: Friday, June 17, 2005 2:40 PM
> To: Harry Reynolds
> Cc: juniper-nsp at puck.nether.net
> Subject: RE: [j-nsp] OSPF route flapping
> 
> Hi Harry,
> I forget attach the file with the trace done. It is attached now.
> 
> In fact, the LSA originating router has defined the static 
> routes and its directly connected with M20 router.
> At the way, the behavior is the same with another M20 router 
> connected to this originating router. Its possible that 
> problem is originated at this last. I will check it with more 
> detail.Its a Summit48si.
> 
> Thanks for your help.
> 
> //Javier
> 
> -----Original Message-----
> From: Harry Reynolds [mailto:harry at juniper.net]
> Sent: Viernes, 17 de Junio de 2005 04:22 p.m.
> To: Javier Gallardo (DF/TEM); Javier Gallardo Córdova
> Cc: juniper-nsp at puck.nether.net
> Subject: RE: [j-nsp] OSPF route flapping
> 
> 
> It appears that a router, ostensibly the LSA originator, has 
> opted to purge them. This is done by re-flooding with max age 
> to flush them from the area's LSDB. In JUNOS software, a 
> clear ospf database purge will cause that router to re-flood 
> all LSAs, not just those that are self originated, with max age. 
> 
> I think you mentioned these were static routes. Any chance 
> they may point to an interface/next-hop that is bouncing on 
> the router the ASBR? Otherwise, need to locate the router 
> that is flooding with max age (may not be the LSA originator, 
> but should be) and go from there.
> 
> Cheers
>  
> 
> > -----Original Message-----
> > From: juniper-nsp-bounces at puck.nether.net
> > [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Javier 
> > Gallardo (DF/TEM)
> > Sent: Friday, June 17, 2005 2:15 PM
> > To: Javier Gallardo Córdova
> > Cc: juniper-nsp at puck.nether.net
> > Subject: RE: [j-nsp] OSPF route flapping
> > 
> > Hi Erdem,
> > 
> > I made a revison for physical link and it doesn´t flap. I 
> check with 
> > ping to Summmit interfase.
> > 
> > No, I activate the traceoptions with "flag packets detail" 
> > and the output is in the attached file.
> > 
> > Do you know why appears the states QUIET->QUIET ,
> > QUIET->PURGE_PENDING.
> > 
> > Too, from the next printouts (taken with brief difference 
> time), I saw 
> > the Age changes abruptly to 3600 from  a value lower to 7.
> > 
> > M20# show ospf database advertising-router 0.164.219.227 extern 
> >  Type       ID               Adv Rtr           Seq      Age  
> > Opt  Cksum  Len
> > Extern   13.52.120.64     0.164.219.227    0x802ec970     2  
> > 0x2  0xe7bc  36
> > 
> > Extern   13.52.120.64     0.164.219.227    0x802ec96e  3600  
> > 0x2  0xebba  36
> > 
> > I´ll appreciate your comments.
> > 
> > Thanks and regards.
> > 
> > //Javier
> > 
> > -----Original Message-----
> > From: juniper-nsp-bounces at puck.nether.net
> > [mailto:juniper-nsp-bounces at puck.nether.net]
> > Sent: Viernes, 17 de Junio de 2005 02:54 p.m.
> > To: Javier Gallardo Córdova
> > Cc: juniper-nsp at puck.nether.net
> > Subject: Re: [j-nsp] OSPF route flapping
> > 
> > 
> > Hi,
> > 
> >  I might be re-stating the obvious but are you sure the 
> physical links 
> > don't flap?
> > Otherwise, it might be an MTU issue, maybe.
> > 
> >  You can turn on ospf traceoptions with something like;
> > 
> > traceoptions {
> > flag packets detail;
> >     flag database-description detail;
> >     flag error detail;
> > }
> > 
> >  Cheers,
> >  Erdem
> > On 6/17/05, Javier Gallardo Córdova <jagc64 at yahoo.com> wrote:
> > > Hi,
> > > 
> > > I have the next behavior at M20 route table for several
> > statics routes announced by a Summit48si via OSPF.
> > > Jun 17 12:42:33 RELEASE  13.52.120.64/30    gw 192.168.2.50 
> >    OSPF     pref 150/0 metric 7/0 fe-0/1/2.0 <Release Int Ext>
> > > Jun 17 12:42:33 ADD      13.52.120.64/30    gw 192.168.2.50 
> >    OSPF     pref 150/0 metric 7/0 fe-0/1/2.0 <Int Ext>
> > > Jun 17 12:42:43 RELEASE  13.52.120.64/30    gw 192.168.2.50 
> >    OSPF     pref 150/0 metric 7/0 fe-0/1/2.0 <Release Int Ext>
> > > Jun 17 12:42:43 ADD      13.52.120.64/30    gw 192.168.2.50 
> >    OSPF     pref 150/0 metric 7/0 fe-0/1/2.0 <Int Ext>
> > > Jun 17 12:42:53 RELEASE  13.52.120.64/30    gw 192.168.2.50 
> >    OSPF     pref 150/0 metric 7/0 fe-0/1/2.0 <Release Int Ext>
> > > Jun 17 12:42:53 ADD      13.52.120.64/30    gw 192.168.2.50 
> >    OSPF     pref 150/0 metric 7/0 fe-0/1/2.0 <Int Ext>
> > > 
> > > Someone know why is the route flapping with 10 seconds period?.
> > > 
> > > Thanks and regards.
> > > //Javier
> > > 
> > > __________________________________________________
> > > Correo Yahoo!
> > > Espacio para todos tus mensajes, antivirus y antispam ¡gratis!
> > > Regístrate ya - http://correo.espanol.yahoo.com/ 
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net 
> > > http://puck.nether.net/mailman/listinfo/juniper-nsp
> > >
> > 
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net 
> > http://puck.nether.net/mailman/listinfo/juniper-nsp
> > 
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net 
> > http://puck.nether.net/mailman/listinfo/juniper-nsp
> > 
> 
> 



More information about the juniper-nsp mailing list