[j-nsp] ATM L2VPN connection help

[Raymond Cheh]

Zeng,

If you use protocol l2vpn encapsulation-type atm-aal5, the encapsulation under the interface needs to be atm-ccc-vc-mux.

For interface encapsulation atm-ccc-cell-relay, you'll need one of the atm-cell encapsulations under protocol l2vpn.

Try those.

Raymond

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] On Behalf Of zeng watchthinker
> Sent: Tuesday, March 01, 2005 4:40 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] ATM L2VPN connection help
> 
> I am setting up a L2VPN connection between logical routers.
> 
> Both PE to CE faced physical interfaces are encapsulated in 'encapsulation
> atm-ccc-cell-relay',
> logical interfaces are encapsulated in 'atm-ccc-cell-relay', routing
> instances 'protocol l2vpn   encapsulation-type atm-aal5'.
> 
> IBGP between both PEs is up, bgp.l2vpn.0 routing table had contain the
> remote site information.
> 
> While in 'show l2vpn connection' there is error message 'intf encaps !=
> instance encaps'.
> 
> Is there any suggestions?
> 
> Thanks!
> 
> _________________________________________________________________
> 享用世界上最大的电子邮件系统― MSN Hotmail。 http://www.hotmail.com
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp