[j-nsp] mpls traffic priority when P router

[Andrew Ramsey]

Hi Hristo,

You could create a filter that matched on MPLS exp bits.

Dig in here and see if it helps:

lab at M20-R27# set firewall family mpls filter ?      
Possible completions:
  <filter-name>        Filter name
  match-mpls           Filter name

Andy

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Hristo Todorov
> Sent: Wednesday, March 23, 2005 12:30 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] mpls traffic priority when P router
> 
> 
> Hello Everybody.
> 
> I have the following setup
> 
> CE----PE1--------P--------PE2-----CE
>      Cisco    Juniper    Cisco
>      7200      M5         7200
> 
> 
> Here M5 is P and connecton between P and PE2 is limited. I 
> have normal traffic and mpls traffic. I need to give priority 
> to mpls traffic leaving the router and leave the rest as is.
>  
> The mpls is configured with ldp on the cisco side
> 
> mpls label protocol ldp
> mpls ldp logging neighbor-changes
> no mpls traffic-eng auto-bw timers frequency 0
> tag-switching tdp router-id Loopback0 force
> 
> Problem is i dont seem to be able to classify the traffic 
> with the filter. I matched the ips for the l2transport route 
> on the ciscos  mpls l2transport route x.x.x.x 200 
> but the counter does not seem to count. So i'm not matching 
> traffic. I also don't have options to match mpls as a protocol.
> 
> The following direction is needed PE1  via ge unit , PE2 via atm unit.
> 
> Sheduler and Scheduler maps for the forwaring-class that need 
> to set priority are already set. 
> Thanks for your time.
> 
> -- 
> Cyberly yours,
> Hristo Todorov
> NOC Operator
> Orbitel, Inc.
> tel.: +359 2 400 4860, +359 2 400 4737 
> fax: +359 2 400 4744
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/junipe> r-nsp
>