[j-nsp] Configuring ipsec with an Adaptive Services PIC

Aviva Garrett aviva at juniper.net
Thu May 12 00:14:40 EDT 2005


Hi John,

For initial reading, I suggest
http://www.juniper.net/techpubs/software/junos/junos72/feature-guide-72/html/fg-ipsec.html

Thanks,
..Aviva

In message <4282D5E9.8040108 at earthlink.net>you write:
>    I have read through the Juniper documentation for JunOS 6.4 and have 
> no trouble defining ipsec/ike proposals and policies. What I am not 
> following is how do I actually apply them. I'm getting lost in rules, 
> rule-sets, services, service-sets, etc. Under Cisco I define my policy, 
> define the traffic to be encrypted/decrypted using an 
access-control-list, combine the acl and policy in a crypto map which is 
> then applied to an interface. What is the Juniper way of doing this? 
> I've found one or two examples using an ES PIC but nothing using the AS 
> PIC. Could someone point me to good documentation or perhaps provide an 
> example config? Thank you.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list