[j-nsp] M10 routing engine memory upgrade

[Jonas Frey]

start shell user root
<enter password>
dmesg | grep ECC

(might not work if the system has been up for a long time and alot of
messages have been loged directly by the kernel e.g. arp addr. changes)

J

On Thu, 2005-05-12 at 21:33, info at beprojects.com wrote:
> >  # router> show chassis scb
> >  # DEVFS: ready for devices
> >  # Pentium Pro MTRR support enabled
> >  # md0: Malloc disk
> > -# DRAM Data Integrity Mode: Non-ECC
> > +# DRAM Data Integrity Mode: ECC Mode with h/w scrubbing
> >  # npx0: <math processor> on motherboard
> >  # npx0: INT 16 interface
> >  # pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on
> > motherboard
> 
> Anybody know what command would be equivalent to this on an M7i?  It 
> doesn't have "show chassis scb" and I'd like to make sure that the DRAM 
> Data Integrity Mode is ECC w/ h/w Scrubbing after I upgrade the DRAM. 
> Thanks.
> 
> Peder
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp