[j-nsp] Juniper Stateful Firewall

[Harshit Kumar]

You need an ASP/ASM pic on the M7i to do a stateful firewall.
 Here is a link to the doc describing how to configure.

https://www.juniper.net/techpubs/software/junos/junos72/swconfig72-servi
ces/html/stateful-firewall-config.html 


-Harshit

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
jnunyez at ac.upc.edu
Sent: Wednesday, May 11, 2005 1:48 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Juniper Stateful Firewall


 Hi,
 I'm a newbie in Juniper and now I'm configuring a firewall for a M7i
Router.
 I want to allow tcp sessions originated from inside my network. Does
anyone
 know how to perform this action?
 I don't know if it's really possible because I'm not sure that in
juniper
 you can make an stateful firewall.
 
 Thanks in advance,
 Jose
 


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp