[j-nsp] ssb L2RW: out of l2 program memory

[Ezequiel Carson]

Hi all,

	I had a mpls vpn running on cisco and i've migrated it to juniper vrf
instance. Everything seems to be working fine and i see the vpnv4 routes
from routers inside of my vpn routing table. The problem  is that after
10 o 15 seconds my SSB starts showing errors like this:

	May 18 04:37:31  JM20x2 /kernel: RT_PFE: NH IPC op 1 (ADD NEXTHOP)
failed, err 1 (Unknown)
May 18 04:37:31  JM20x2 /kernel: RT_PFE: NH details: idx 427 type 2 ifl
67
May 18 04:37:31  JM20x2 /kernel: RT_PFE: NH IPC op 32 (ADD INDIRECT
NEXTHOP) failed, err 1 (Unknown)
May 18 04:37:31  JM20x2 /kernel: RT_PFE: NH IPC op 1 (ADD NEXTHOP)
failed, err 1 (Unknown)
May 18 04:37:31  JM20x2 /kernel: RT_PFE: NH details: idx 616 type 2 ifl
67
ssb L2RW: out of l2 program memory.
May 18 04:37:31  JM20x2 ssb L2RW: Fails to install L2 program
May 18 04:37:31  JM20x2 ssb NH(nh_ucast_add): NULL l2rw_pgm_cptr
May 18 04:37:31 JM20x2 ssb NH: Indirect nh (435) with unknown target nh
(427)
May 18 04:37:46  JM20x2 ssb NH: Failed to find nh (427) for deletion
May 18 04:37:46  JM20x2 ssb NH: Failed to find nh (616) for deletion
May 18 04:37:46 JM20x2 ssb NH: Failed to find nh (618) for deletion
May 18 04:37:46  JM20x2 ssb NH: Failed to find nh (620) for deletion
May 18 04:37:46  JM20x2 ssb NH: Failed to find nh (622) for deletion


I found that deactivating  routing-instance  removes the errors.

this is my vpn configuration:
SAA {
    instance-type vrf;
    interface ge-0/2/0.76;
    route-distinguisher AS:999000010;
    vrf-target target:AS:999000010;
}

Is anything wrong on my vpn configuration?

Thanks
Ezequiel