[j-nsp] cRTP between Juniper M40e(PE) & Cisco (CPE's)

[Erdem Sener]

Hi,

 for cRTP, you'll need an AS-PIC (or AS-PIC II which only differs by
supported throughput) and JunOS higher than 7.1, if I'm not mistaken.

 Cheers,
 Erdem

On 5/22/05, Hemant Narkhede <hemantn at houstontechnologies.com> wrote:
> Hi Guys,
> 
> I am trying to configure cRTP ( IP header compression ) between Juniper M-series & Cisco routers.
> 
> Can I use iphc-header compression on Cisco & Juniper. But according to my knowledge Juniper supports only ietf.
> 
> We can't change Cisco since thousdands of customer connected to that. So if cRTP would work then either we have to change Cisco IOS ( so that it supoorts IETF ) or change Juniper JUNOS version ( which supports iphc-header)
> 
> So what will be the workaround for this ?
> 
> Hemant
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 


-- 

-erdem