[j-nsp] SSH Server

[Giuliano Cardozo Medalha]

Craig,

When I try to use putty client or SSH.com client both answer to me:

Authentication Error ... Connection Closed by remote host.

Its necessary to config the user with special things like ssh-dsa 
"public-key" ???

Junos does not have to generate DSA (for version 2) public key ?

Thanks a lot

Giuliano




> When you typed this below, you committed the
> configuration after right?  What error are you
> receiving?  Are there any filters on the interfaces?
> 
> You shouldn't _need_ to generate keys to access
> the router using ssh client.  BTW, the default
> protocol version should be ssh v2 and unless you
> configure v1 you must use v2 to connect.
> 
> Connecting from garnet to R1 with basic config is
> a success:
> 
> ---snip---
> 
> craigp at R1> show configuration system services
> ftp;
> ssh;
> telnet;
> 
> craigp at R1> monitor start messages
> 
> craigp at R1>
> *** messages ***
> May 24 18:45:36  R1 sshd[3008]: Accepted password for craigp from  
> 172.17.28.17 port 2482 ssh2
> 
> ---snip---
> 
> ---snip---
> 
> craigp at garnet> ssh tp1
> craigp at tp1-fxp0.englab.juniper.net's password:
> --- JUNOS 7.0R2.7 built 2005-01-06 06:58:15 UTC
> 
> craigp at R1>
> 
> ---snip---
> 
> regards
> -Craig
> 
> On May 24, 2005, at 7:10 PM, Giuliano Cardozo Medalha wrote:
> 
>> People,
>>
>> We have a J2300 with Junos-Jseries-7.2.
>>
>> How is possible to configure SSH system service.
>>
>> I have tried:
>>
>> router#set system services ssh protocol-version v2
>>
>> but ... when I try to autenticate with a SSH client ... it said to me
>> that is not possible to do.
>>
>> It is necessary to generate RSA and DSA public keys ?
>>
>> Thanks a lot
>>
>> Giuliano
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>