[j-nsp] about ARP

[zeng watchthinker]

Thanks! Your explaination is acceptable.

Is there any reason would cause GE interoperate problems? There is nothing 
to set except 'auto negotiation'. 

Thanks for your suggestion.

>From: "Steven Wong" <swong at juniper.net>
>To: "zeng watchthinker" 
<watchthinker at hotmail.com>,<juniper-nsp at puck.nether.net>
>Subject: RE: [j-nsp] about ARP
>Date: Wed, 25 May 2005 09:42:41 -0700
>
>This is used to detect duplicated IP address on the segment.
>
>- Steven
>
> > -----Original Message-----
> > From: juniper-nsp-bounces at puck.nether.net
> > [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
> > zeng watchthinker
> > Sent: Thursday, May 26, 2005 12:36 AM
> > To: juniper-nsp at puck.nether.net
> > Subject: [j-nsp] about ARP
> >
> > I found a strange problem when testing GE interoperate
> > between 2 routes.
> >
> > Our side GE is flapping. When mirrored and capture some
> > packets, it always
> > generate ARP request for its own IP address(!?) What will be
> > the cause of
> > this problem? It seems not real but it do happen
> >
> > _________________________________________________________________
> > 享用世界上最大的电子邮件系统― MSN Hotmail。 http://www.hotmail.com
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/juniper-nsp
> >

_________________________________________________________________
与联机的朋友进行交流，请使用 MSN Messenger: http://messenger.msn.com/cn