[j-nsp] loss of keep alive

[Josef Buchsteiner]

        once you configure only
        
        "set redundancy failover on-loss-of-keepalives'

        then the failover time is after 300 second per default.
        If you want to change the failover time you have to add
        the

        keepalive-time       Time before Routing Engine failover (2..10000 seconds)


        Josef

Tuesday, November 8, 2005, 4:08:07 PM, you wrote:

jac>    
jac>    
jac> HI,
jac>  
jac>   I was wondering if you can shed some light on our two
jac> configuration option for RE redundancy.
jac>  Keepalive-time and loss of keepalive
jac>  
jac>  They essentially are the same thing. so do I need to configure  both or just either one.
jac>  
jac>  thanks in advance
jac>  
jac>  _______________________________________________
jac>  juniper-nsp mailing list juniper-nsp at puck.nether.net
jac>  http://puck.nether.net/mailman/listinfo/juniper-nsp
jac>   
jac>   
jac>