[j-nsp] Failure detection on Ge interfaces

[Michael Lyngbøl]

On 03.10.2005 14:38:24 +0200, Filippo Cugini wrote:
> Hi all,
> we have M10 with GE LX optical interfaces running ospf and mpls (junos 7.1).
> We evaluated the M10 behavior in case of failure (fiber cut)
> We have noticed that routers check the operative status of the GE interface 
> once a second, thus determining a significant failure detection time (from 
> 0,1 to 1 sec).
> Is it possible to force the router to check the status more frequently?

You could use BFD.

/Michael

-- 
Michael Lyngbøl -- michael at lyngbol dot dk
Network Architect, AS3292 TDC, IP·backbone