[j-nsp] Failure detection on Ge interfaces

[Filippo Cugini]

Josef,
we have PE-1GE-LX-B cards  (1 port Gigabit Ethernet PIC, LX Optics (1310nm, 
single mode fiber) with PIC ejector)
Thanx
  Filippo



----- Original Message ----- 
From: "Josef Buchsteiner" <josefb at juniper.net>
To: "Filippo Cugini" <filippo.cugini at cnit.it>
Cc: <juniper-nsp at puck.nether.net>
Sent: Monday, October 03, 2005 4:57 PM
Subject: Re: [j-nsp] Failure detection on Ge interfaces


> Filippo,
>        is the a PIC with SFP connectors ?
>        thanks
>        Josef
>
> Monday, October 3, 2005, 2:38:24 PM, you wrote:
>
> FC>
> FC>
> FC> Hi all,
> FC>  we have M10 with GE LX optical interfaces running ospf and mpls 
> (junos 7.1).
> FC>  We evaluated the M10 behavior in case of failure (fiber cut)
> FC>  We have noticed that routers check the operative status of the GE 
> interface
> FC>  once a second, thus determining a significant failure detection time 
> (from
> FC>  0,1 to 1 sec).
> FC>  Is it possible to force the router to check the status more 
> frequently?
> FC>  Thanx in advance
> FC>  Filippo