[j-nsp] Juniper box equivalent to GSR

[Dusan Avbreht]

Just on the PE router - lacking edge ...

Lep pozdrav - Best regards
Dušan Avbreht
 
Smart Com d.o.o.
Brnčičeva 45
SI-1231 Ljubljana, Slovenia
 
Phone: +386 1 5308 312
Fax: +386 1 5611 571 
E-mail: dusan.avbreht at smart-com.si
http://www.smart-com.si/ 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Kim Onnel
Sent: 19. oktober 2005 14:35
To: Saku Ytti
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Juniper box equivalent to GSR

if u are referring to MPLS-VPN with RFC2547bis, then I dont think we need it
on the P router ?

On 10/19/05, Saku Ytti <saku+juniper-nsp at ytti.fi> wrote:
>
> On (2005-10-19 13:46 +0200), Dusan Avbreht wrote:
>
> > M-320 can be used as edge and core IP/MPLS routers. Cisco XR12k and way
> more
> > CRS-1 are core routers lacking edge feauters.
> > i.e XR12k and CRS-1 they don't have VPLS support.
>
> Your information is bit inaccurate, XR12k implies IOS-XR as does
> CRS-1, so software features are almost the same (and lacking
> in edge compared to Juniper)
> However XR will support RFC2547bis in next release, which is
> due this year.
>
> --
> ++ytti
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp