[j-nsp] Juniper box equivalent to GSR

[michael.firth at bt.com]

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Rubens Kuhl Jr.
> Sent: 19 October 2005 14:59
> To: Kim Onnel
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Juniper box equivalent to GSR
> 
> 
> > If i need to add multicast too, i'll use one PIC i guess,
> 
> If you need Protocol Independent Multicast-Sparse Mode 
> (PIM-SM) tunnels, you can buy the M7i with integrated 
> adaptive services PIC(which would give you other nice 
> services as well). But using PIM-SM tunnels are just one 
> multicast scenario, is this what are you doing or planning to ?
> 
The M7i without integrated AS features still has an integrated tunnel
PIC, 
which is what's needed for Multicast tunnel handling. It can also
support 
the other JunOS tunnelling options too, have a look at:

http://www.juniper.net/techpubs/hardware/m7i/m7i-hwguide/m7i-hwguide.pdf
(page 9)

and

http://www.juniper.net/products/modules/100092.pdf


Regards

Michael