[j-nsp] Recovery password for J4300

Tue Oct 25 10:43:53 EDT 2005

Worked thx very much
Rommel

-----Original Message-----
From: Harry Reynolds [mailto:harry at juniper.net] 
Sent: 25 October 2005 15:44
To: Rommel Rizzato; juniper-nsp at puck.nether.net
Subject: RE: [j-nsp] Recovery password for J4300

You can do normal password recovery (console attach, reboot into single
user, etc), or you can press and hold the config button for 15 seconds
to return the unit to a factory config with no root password.

>From the manual:

CAUTION: Pressing and holding the CONFIG button for 15 seconds or
more-until the configuration LED blinks red-deletes all configurations
on the router, including
the backup configurations and rescue configuration, and loads and
commits the factory configuration.

HTHs

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Rommel Rizzato
> Sent: Tuesday, October 25, 2005 3:52 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Recovery password for J4300
> 
> 
> HI Folks
> 
> Any link How to do a recovery password on J4300?
> 
> Thanks
> R
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 