[j-nsp] disk period-standby logging priority

Josef Buchsteiner josefb at juniper.net
Wed Oct 26 03:43:49 EDT 2005



Wednesday, October 19, 2005, 2:00:29 PM, you wrote:

JK>    
JK>    
JK> Is there any way of changing (lowering) the priority that certain
JK>  syslog messages are logged at? Specifically, since we did 'set chassis
JK>  routing-engine disk periodic-standby', JunOS seems to have decided
JK>  what look distinctly like debugging/info messages (harddrive was idle
JK>  for xxx seconds) at NOTICE, which means we are suddenly logging
JK>  considerably more than we have done previously.


     so two line entry per day is perceived as 'considerably more..' ?
     In the future this message will go into smartd.trace logs rather
     then syslog. The information are important to us. If you still
     don't like them then filter them out

           Josef
JK>  
JK>  I don't really want to raise our logging priority requirements as I
JK>  don't want to miss anything that may be important, but I also don't
JK>  want to have pages and pages of this in my logs either.
JK>  
JK>  Does anyone have any ideas how to solve this?
JK>  
JK>  Thanks,
JK>  Ras
JK>  
JK>  _______________________________________________
JK>  juniper-nsp mailing list juniper-nsp at puck.nether.net
JK>  http://puck.nether.net/mailman/listinfo/juniper-nsp
JK>   
JK>   
JK>    
 


More information about the juniper-nsp mailing list