[j-nsp] load balancing between multiple BGP links

[Joe Shen]

Hi,

How could load on multiple BGP peer links be balanced
automatically?

The situation we are facing:

             ---------------------------|
             |  Service provider        |
             |                          |
             --R1--------------------R2---
               |\                     |
               | \       E-BGP        |
               |  \ ----------------\ |          
               |                     \|
            ----R3--------------------R4-|
            |     Our Network            |
            |      (OSPF)                |
            -----------------------------  

The three links between our network and Service
provider network are all 1Gbps. Now, we noticed that 
load on link R1-R3, R1-R4 is about 50% (in/out), but
load on R2-R4 are about 90% ( in/out).

How could we balance those load on the three links
automatically? or must we tune the route mannually? 

Is there any technical guide on this?

thanks  in advance.

Joe  


	

	
		
___________________________________________________________ 
雅虎免费G邮箱－中国第一绝无垃圾邮件骚扰超大邮箱 
http://cn.mail.yahoo.com