[j-nsp] No export from cflowd enabled POS interface
Joe Shen
sj_hznm at yahoo.com.cn
Thu Sep 22 23:57:24 EDT 2005
Hi,
--- Erik Haagsman <erik at we-dare.net>写道:
> Any reason you're sampling both ingress as well as
> egress instead of
> just ingress on "opposing" interfaces...?
We only sampling egress links which connects to ISP.
Are the
> two interfaces you're
> not seeing traffic on the inverse of the two
> interfaces you are seeing
> traffic on (meaning ingress traffic on one flows to
> egress traffic on
> the other)..?
No.
> > The four PoS interfaces(so-0/0/0.0, so-0/1/0.0,
> > so-1/0/0.0,so-2/0/0.0 so-3/0/0.0) are configured
> like:
> >
> >
> > so-3/0/0 {
> > description "to backbone";
> > encapsulation cisco-hdlc;
> > sonet-options {
> > fcs 32;
> > payload-scrambler;
> > }
> > unit 0 {
> > family inet {
> > filter {
> > input netflow;
> > output netflow;
> > }
> > address 10.10.41.251/30;
> > }
> > family iso;
> > }
> > }
> >
> > Forward option is :
> >
> > forwarding-options {
> > sampling {
> > input {
> > family inet {
> > rate 5800;
> > }
> > }
> > output {
> > cflowd 10.96.13.46 {
> > port 9900;
> > version 5;
> > }
> > }
> > }
> > }
> >
> > Filter is configured as:
> >
> > firewall {
> >
> > filter netflow {
> > term 1 {
> > then {
> > sample;
> > accept;
> > }
> > }
> > }
> > }
> >
> > But, I can't see netflow export data on interface
> > so-0/1/0.0 and so-2/0/0.0.
> >
> > regards
> >
> > joe
> >
> >
> >
> > --- "Rafal Szarecki (WA/EPO)"
> > <rafal.szarecki at ericsson.com>写道:
> >
> > > You not provied config, so hard to say.
> > >
> > > Where you call for samplin? In filter of on
> > > interface level?
> > > What is applied filters?
> > > What direction?
> > >
> > > If juyr J-Flow is done base on RE (not
> > > AS-PIC/PM-PIC) then JUNOS intriduce limitation
> for
> > > number of samples delivered to RE per second.
> > > (default 1000 if I remember correctly) so it is
> also
> > > possible that you loose some information from
> > > problematic interfaces. However I do not expect,
> > > espetialy if traffic volume of interfaces is at
> same
> > > level)
> > >
> > > Rafal Szarecki JNCIE
> > >
> > > skype me <callto://Rafal_Szarecki/>
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: juniper-nsp-bounces at puck.nether.net
> > > > [mailto:juniper-nsp-bounces at puck.nether.net]On
> > > Behalf Of Joe Shen
> > > > Sent: Thursday, September 22, 2005 4:39 AM
> > > > To: juniper-nsp at puck.nether.net
> > > > Subject: [j-nsp] No export from cflowd enabled
> POS
> > > interface
> > > >
> > > >
> > > > Hi,
> > > >
> > > > I'm trying to collect Cflowd export
> information on
> > > our
> > > > core router. After setting up cflowd I applied
> it
> > > to 4
> > > > POS ports.
> > > >
> > > > But, I noticed there is only netflow traffic
> > > records
> > > > on two of four ports when I analyze those data
> > > got.
> > > > The interface configuration is the same on the
> > > four
> > > > ports besides IP address.
> > > >
> > > > Why?
> > > >
> > > > thanks
> > > >
> > > > Joe
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
>
___________________________________________________________
> > >
> > > >
> 雅虎免费G邮箱-中国第一绝无垃圾邮件骚扰超大邮箱
> > > > http://cn.mail.yahoo.com
> > > >
> > > >
> _______________________________________________
> > > > juniper-nsp mailing list
> > > juniper-nsp at puck.nether.net
> > > >
> > >
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> > > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
>
___________________________________________________________
>
> > 雅虎免费G邮箱-中国第一绝无垃圾邮件骚扰超大邮箱
> > http://cn.mail.yahoo.com
> >
> > _______________________________________________
> > juniper-nsp mailing list
> juniper-nsp at puck.nether.net
> >
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> --
> ---
> Erik Haagsman
> Network Architect
>
Joe
___________________________________________________________
雅虎免费G邮箱-中国第一绝无垃圾邮件骚扰超大邮箱
http://cn.mail.yahoo.com
More information about the juniper-nsp
mailing list