[j-nsp] b/w limit M320 FPC2

[George Yalamov]

Hi,

According to the documentation you can  use  PB-4GE-SFP in FPC2 but my 
be bandwith will be oversubscribed. I think it is like M5/M7i, you can 
put 4 1GE PICs but can't use full 4Gbps, because  throughput rate is 
3.2Gbps full duplex.

Regards,
George



Alexander Koch wrote:

>Hello,
>
>what is it I have to do to get the answer on this one? I can
>open a case for that, but that path I did not want to go for
>potentially obvious reasons. I am surely willing to go that
>way, if it is the only one.
>
>Regards,
>Alexander
>
>On Thu, 6 April 2006 16:11:11 +0200, Alexander Koch wrote:
>  
>
>>Folks,
>>
>>FPC2 nominally do 10G, and then nominally 2.5G per PIC.
>>Think about the 4xGE PIC and 4 of them on a FPC2. How
>>'dynamic' is that setup going to be, and what is the hard
>>limit for one of these PICs under these circumstances?
>>
>>Thanks,
>>Alexander
>>    
>>
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/juniper-nsp
>
>  
>