[j-nsp] Bringing DM multicast into a SM domain

[Leonard Giuliano]

No, there is no such command in Junos.  However, you can get this to work 
by fooling the SM border router into thinking the source is directly 
connected by adding a dummy secondary address that is in the same subnet 
as the source to the border interface.  This may break unicast 
connectivity to that source subnet, though.

A simpler alternative that seems to work is to simply make the SM border 
router an RP.

Hope this helps,
Lenny

On Thu, 13 Apr 2006, Jee Kay wrote:

-) On Cisco routers, there is a configuration command 'ip pim dense-mode
-) proxy-register' that allows that router to pull a dense-mode multicast
-) stream into a sparse-mode domain by sending PIM Register messages for
-) non-directly connected sources.
-) 
-) Does Juniper have something similar?
-) 
-) _______________________________________________
-) juniper-nsp mailing list juniper-nsp at puck.nether.net
-) http://puck.nether.net/mailman/listinfo/juniper-nsp
-)