[j-nsp] [ERX] Help needed simulating ppp users

[Guillet, David (David)]

Hi nobody has an idea on this ?

regards 

david

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of 
> Guillet, David
> (David)
> Sent: lundi 17 avril 2006 18:14
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] [ERX] Help needed simulating ppp users
> 
> 
> Hi,
> 	I'm trying to simulate a PPP user using a PPPoE 
> connection according
> to KA 200. 
> 
> 	I put the following configuration on my router but I 
> could not make
> it work :
> 
> 	On ATM port 2/3 my simulated user is configured while 
> in slot 2/2 I
> create a static pppoe subinterface. Here is the conf detail :
> 
> 
> int atm 2/3.0
> atm pvc 100 0 100 aal5snap
> encap pppoe
> pppoe allow-client
> pppoe subint atm 2/3.0.1
> encap ppp
> ip addr 11.11.11.11 255.255.255.255
> pppoe test-client
> ppp client chap hostname user1 at pppoe_dyn.lab password dynamic
> ppp client ip-address 0.0.0.0
> 
> int atm 2/2.0
> atm pvc 101 0 100 aal5snap
> encap pppoe
> pppoe subint atm 2/2.0.1
> encap ppp
> ppp auth chap 
> ip add 22.22.22.22 255.255.255.0
> ip access-route
> 
> Does anyone have an idea of why this is not working ? I also 
> tried to use
> the atm int 2/3.0.1 and atm in 2/3.0.1 commands for creating 
> the pppoe sub
> interface but it's not working either.
> 
> Regards
> 
> David
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>