[j-nsp] JunOSe ACL Question

[Gardener]

Are you sure, that you want to make an ACL on Juniper Router?

On 4/19/06, Scott Weeks <surfer at mauigateway.com> wrote:
>
>
>
> Am I lost?  (I hope not, but just in case
> <flameproof_underware == ON>)  I want to do this:
>
> access-list SMTP-finder permit tcp any host xxx.xxx.xxx.xxx
> eq 25
>
>
> router(config)# access-list SMTP-finder permit ?
>   A.B.C.D  The host address to match
>   any      Match any address
>   host     Identify the address as a host (use a host
> wildcard)
>   ip       Configure an access list specific to the IP
> protocol
>
> router(config)#access-list SMTP-finder permit ip ?
>   A.B.C.D  The source address to match
>   any      Match any address
>   host     Identify the address as a host (use a host
> wildcard)
>
> (config)#access-list SMTP-finder permit ip any host
> xxx.xxx.xxx.xxx ?
>   log   log the address that matches this access-list entry
>   <cr>
>
> Thanks,
> scott
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>



--
----------------------
NO STREES
ECO ATTITUD :D