[j-nsp] PIM-SMv6 .. bootsrap not forwaded in o/g intfaces
Subhajit Pal
subhajit.pal at gmail.com
Sun Aug 13 03:41:36 EDT 2006
Hi
Am using junos 7.6 ( M5 ).
Am sending a bootstrap msg from my application ( ipv6 bootstrap router
) and junier is not forwarding the bootstrap msg to its outgoing
interface.
Got the following in debug –
Aug 10 17:18:44 PIM fe-0/3/0.0 RECV fe80::270:69ff:feb2:f411 ->
ff02::d V2 Bootstrap sum 0x788e len 72
Aug 10 17:18:44 tag 0 masklen 126 priority 255 bootstrap router 3ffe:9::10
Aug 10 17:18:44 group ff0e:1::2 count 1 fragcount 1
Aug 10 17:18:44 rp address 3ffe:9::10 holdtime 60 priority 0
Aug 10 17:18:44 PIM Bootstrap not enabled on fe-0/3/0.0
Have the following configuration at Juniper :
I have enable pim-sparse mode in three interface and enable ipv6 . Am
sending bootstrap msg to the link local address of one of the
PIM-Interface. Juniper debug says .. PIM neighbor correctly . Did not
introduce any policy to block / filter bootstrap. Only I'vr added a
static route to rp ( global address ).
Please help me in providing solution why Juiper is not our boostrap .
Regards,
subhajit
More information about the juniper-nsp
mailing list