[j-nsp] Juniper log settings

[Georg Bachler]

Hi,

If you configure log-updown option under any of the bgp hierarchy levels,
BGP state transitions will be logged at warning level.

Configuring BGP to Log System Log Messages:
http://www.juniper.net/techpubs/software/junos/junos80/swconfig80-routing/html/bgp-config62.html#1016413


georg at ankara-re0> show log messages |last |match bgp
Aug 28 16:43:09  ankara-re0 rpd[3147]: %DAEMON-4: bgp_traffic_timeout: NOTIFICATION sent to 192.168.1.8 (Internal AS 64512): code 4 (Hold Timer Expired Error), Reason: holdtime expired for 192.168.1.8 (Internal AS 64512), socket buffer sndcc: 38 rcvcc: 0 TCP state: 4, snd_una: 2725219125 snd_nxt: 2725219125 snd_wnd: 16384 rcv_nxt: 2243555251 rcv_adv: 2243571649, keepalive timer 0
Aug 28 16:43:09  ankara-re0 rpd[3147]: %DAEMON-4: bgp_event: peer 192.168.1.8 (Internal AS 64512) old state Established event HoldTime new state Idle
  < ... >
Aug 28 16:44:13  ankara-re0 rpd[3147]: %DAEMON-4: bgp_event: peer 192.168.1.8 (Internal AS 64512) old state OpenConfirm event RecvKeepAlive new state Established

--
  BR, Georg