[j-nsp] IP Cache Flow

[rodrigo.santos at quantiza.com]

To configure:

  set interfaces sp-1/2/0 unit 0 family inet address 10.1.1.1/32 
destination 10.1.1.2

  set forwarding-options sampling input family inet rate 100
  set forwarding-options sampling output cflowd <collector ip> port 
<collector port>
  set forwarding-options sampling output flow-inactive-timeout 15
  set forwarding-options sampling output flow-active-timeout 60
  set forwarding-options sampling output interface sp-1/2/0 
source-address <loopback IP>

"sh ip ca fl" then is "show services accounting flow-detail terse"

maf at clmbo-r4> show services accounting flow-detail terse
Service Accounting interface: sp-1/2/0, Local interface index: 129
Service name: (default sampling)
Interface state: Accounting
Protocol   Source         Source  Destination Destination    Packet    Byte
           address          port  address            port     count    
count
tcp(6)     164.107.X.X       22  69.133.X.X          2257       265  365312
tcp(6)     130.108.X.X     3064  66.55.X.X             80       231    9240
...

Link:
https://puck.nether.net/pipermail/juniper-nsp/2005-February/003722.html

Rodrigo Santos - Administrador de Redes Sênior
Quantiza Systems - 55(51) 3373-5757/3598-2343
MCSA/MCSE/CCNA Certified



Edson Cardoso wrote:

>Hello All,
>Does anybody know how can I achieve same result of IOS "show ip cache flow" on Junos ( M-Series ) ??
>I was thinking to use something with Sampling ..
>Appreciate any help..
> 
>Tnks
>Edson
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/juniper-nsp
>  
>