[j-nsp] BGP configuration problem

[Harshit Kumar]

Oh didnt realize he was doing it under VRF. Anything PE to PE or RR has
to be in inet.0.
 
harshit
 


________________________________

	From: hritter at videotron.ca [mailto:hritter at videotron.ca] 
	Sent: Wednesday, January 04, 2006 1:00 PM
	To: Harshit Kumar
	Cc: vinay pit; juniper-nsp at puck.nether.net
	Subject: Re : RE: [j-nsp] BGP configuration problem
	
	
	You cannot configure the inet-vpn family under the vrf routing-instance. Try configuring it under the global protocols bgp stanza.
	 
	Hope this helps,

	----- Message d'origine -----
	De: Harshit Kumar <harshit at juniper.net>
	Date: Mercredi, Janvier 4, 2006 3:01 pm
	Objet: RE: [j-nsp] BGP configuration problem
	À: vinay pit <vinay_pit at yahoo.com>, juniper-nsp at puck.nether.net
	
	> you need to configure family inet-vpn in group test1
	> 
	> > -----Original Message-----
	> > From: juniper-nsp-bounces at puck.nether.net 
	> > [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
	> vinay pit
	> > Sent: Wednesday, January 04, 2006 2:35 AM
	> > To: juniper-nsp at puck.nether.net
	> > Subject: [j-nsp] BGP configuration problem
	> > 
	> > Help needed...
	> > 
	> > I already have created a routing instance for a
	> > customer between R2 (Juniper ) and R1 (Cisco) , in the
	> > routing instance i have defined the protocol bgp and
	> > have mentioned the configuration which is as below.
	> > *******************
	> > R2 (Juniper config)
	> > ***************************************************************
	> > description ***RI_Ce-1***;
	> > instance-type vrf;
	> > interface ge-1/0/0.1;
	> > interface fe-1/2/3.1;
	> > interface so-2/1/3.0;
	> > route-distinguisher 456:1;
	> > vrf-target target:456:1;
	> > vrf-table-label;
	> > routing-options {
	> > static {
	> > route 172.16.1.0/27 next-hop 10.0.0.2;
	> > route 172.16.2.0/27 next-hop 10.0.0.2;
	> > route 172.16.3.0/27 next-hop 10.0.0.2;
	> > route 172.16.4.0/27 next-hop 10.0.0.2;
	> > }
	> > }
	> > protocols {
	> > bgp {
	> > group ce-1 {
	> > local-address 10.1.0.2;
	> > authentication-key "$9$lbuMWx2gJDHm8XJD";
	> > ## SECRET-DATA
	> > export global_cust;
	> > peer-as 123;
	> > local-as 456;
	> > neighbor 10.1.0.1;
	> > }
	> > group test-1 {
	> > local-address 200.0.2.1;
	> > authentication-key "$9$Ddkqf9Cu1Ey.Pu1";
	> > ## SECRET-DATA
	> > export global_cust;
	> > peer-as 123;
	> > local-as 123;
	> > neighbor 200.0.2.2;
	> > }
	> > }
	> > }
	> > ***************************************************************
	> > 
	> > The group ce-1 is for the BGP session between R2
	> > (Juniper ) and R1 (Cisco)
	> > 
	> > Now i need to connect to a different cisco router R3
	> > (cisco , route reflector). so i have created a group
	> > called test-1 in the same routing instance. 
	> > 
	> > *****************************
	> > the config of R3 is as below...
	> > ****************************************************************
	> > router bgp 123
	> > bgp log-neighbor-changes
	> > neighbor 200.0.2.1 remote-as 123
	> > neighbor 200.0.2.1 password cisco
	> > !
	> > address-family ipv4
	> > no neighbor 200.0.2.1 activate
	> > no auto-summary
	> > no synchronization
	> > exit-address-family
	> > !
	> > address-family vpnv4
	> > neighbor 200.0.2.1 activate
	> > neighbor 200.0.2.1 route-reflector-client
	> > neighbor 200.0.2.1 send-community both
	> > exit-address-family
	> > ****************************************************************
	> > 
	> > Please help me out as the bgp sessions are not comming
	> > up still in idle state......
	> > 
	> > 
	> > Regards
	> > Vinay 
	> > 
	> > 
	> > > --- vinay pit wrote:
	> > > 
	> > > > Dear All
	> > > > 
	> > > > I have very less experience in Juniper Routers. I
	> > > > need
	> > > > to configure a MPBGP session between a Juniper
	> > > M40e
	> > > > router and a cisco router. The cisco router acts a
	> > > > RR
	> > > > (Route Reflector) and the juniper router as a
	> > > client
	> > > > of it.
	> > > > 
	> > > > Please can any one tell me what all is the
	> > > > configuration to be done on the Juniper router.
	> > > > 
	> > > > Regards
	> > > > Vinay 
	> > > > 
	> > > > 
	> > > > 
	> > > > __________________________________________ 
	> > > > Yahoo! DSL - Something to write home about. 
	> > > > Just $16.99/mo. or less. 
	> > > > dsl.yahoo.com 
	> > > > 
	> > > > _______________________________________________
	> > > > juniper-nsp mailing list
	> > > juniper-nsp at puck.nether.net
	> > > >
	> > > http://puck.nether.net/mailman/listinfo/juniper-nsp
	> > > > 
	> > > 
	> > > 
	> > > 
	> > > 
	> > > 
	> > > __________________________________ 
	> > > Yahoo! for Good - Make a difference this year. 
	> > > http://brand.yahoo.com/cybergivingweek2005/
	> > > 
	> > 
	> > 
	> > 
	> > 
	> > __________________________________________ 
	> > Yahoo! DSL - Something to write home about. 
	> > Just $16.99/mo. or less. 
	> > dsl.yahoo.com 
	> > 
	> > _______________________________________________
	> > juniper-nsp mailing list juniper-nsp at puck.nether.net
	> > http://puck.nether.net/mailman/listinfo/juniper-nsp
	> > 
	> 
	> _______________________________________________
	> juniper-nsp mailing list juniper-nsp at puck.nether.net
	> http://puck.nether.net/mailman/listinfo/juniper-nsp
	>