[j-nsp] Get a route not to be installed in one router in an OSPFarea?

[Raymond Cheh]

Fredrik,

Try import policy. It does not prevent the route from being flooded in
the ospf lsa, it simply prevents the route from being installed in the
routing table.

http://www.juniper.net/techpubs/software/junos/junos74/swconfig74-routin
g/html/ospf-config37.html

Hope this helps.

Raymond

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] On Behalf Of F J
> Sent: Thursday, January 05, 2006 8:58 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Get a route not to be installed in one router in an
> OSPFarea?
> 
> Hi,
> I have a couple of M-series routers running OSPF in a single area. Is
> there
> an easy way to configure the net so that one of them not
recieves/installs
> a
> particular route distributed in OSPF?
> 
> I.e. I would like router X not to install the route 192.168.0.0/24 in
the
> routing table. This router X is only connected to one of the other
routers
> on interface Y.
> 
> Best Regards
> /// Fredrik