[j-nsp] Kompella L2VPN question urgent-Multiple CE connections

shahryar khan kshahryark at yahoo.co.uk
Mon Jan 23 18:27:14 EST 2006


  Hi , 
   
            10/33                       10/33
     CE1 ---------- PE1------------ PE2------- CE2
         ---10/34--                    -10/34-
         ---10/35--                    -10/35- 
     
  We have like 4 CE devices with 9 PVC's going towards every other site ( i have shown just 2 sites with 3 pvcs only) . This makes a full mesh of 9PVC's going towards every site. While using Kompella someone said that there seems to be a limitation that if more than one logical circuit connects to the same ce, then a different Site-id and a different L2VPN has to be used. Please note that the VPI/VCI numbers could be the same on different Sites as well.
  In my opinion, that as a unique site-id shall be assigned to different PVC's and remote-site id also configured, this scenario should work neverthess as a unique label per site would be generated in any case. The only thing is that the configuration would be very lengthy.
  Is there a better way to configure the L2VPN ? 
  Best Regards
  Shahryar 


		
---------------------------------
To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre.


More information about the juniper-nsp mailing list