[j-nsp] OSPF MTU-IGNORE?

Hyunseog Ryu r.hyunseog at ieee.org
Wed Jul 19 16:41:02 EDT 2006


Hi Guys,

Currently I'm running Cisco/Juniper multi-vendor networks.
>From one of ethernet segment, I would like to change MTU for MPLS network.
But the problem is that one of cisco router doesn't allow to change MTU
size for ehternet card.
So I would like to use "ip ospf mtu-ignore" command from Cisco.
I'm wondering whether Juniper has equivalent command or not.
This will disable OSPF MTU mismatch check for OSPF between routers.

Thanks.

Hyun




More information about the juniper-nsp mailing list