[j-nsp] OSPF MTU-IGNORE?
harry at juniper.net
Wed Jul 19 16:45:54 EDT 2006
The last I heard the answer was "no", in part because it breaks section
10.6. of the rfc.
Perhaps you can change the mtu on the JNI to match the cisco?
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Hyunseog Ryu
> Sent: Wednesday, July 19, 2006 1:41 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] OSPF MTU-IGNORE?
> Hi Guys,
> Currently I'm running Cisco/Juniper multi-vendor networks.
> >From one of ethernet segment, I would like to change MTU for
> MPLS network.
> But the problem is that one of cisco router doesn't allow to
> change MTU size for ehternet card.
> So I would like to use "ip ospf mtu-ignore" command from Cisco.
> I'm wondering whether Juniper has equivalent command or not.
> This will disable OSPF MTU mismatch check for OSPF between routers.
> juniper-nsp mailing list juniper-nsp at puck.nether.net
More information about the juniper-nsp