[j-nsp] ERX Problem : MP BGP route import not working between 2 PE

[Richmond, Jeff (ELI)]

Sounds like you have a possible route-target mismatch of some sort. Do you have matching route-target statements or route-maps under the "ip vrf ..." section on both PE's?

example:
ip vrf 100
  rd x.x.x.x:100
  route-target both xxxx:100


-Jeff


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of Guillet, David
(David)
Sent: Thursday, June 01, 2006 8:02 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] ERX Problem : MP BGP route import not working between 2
PE


Hi,
	I have a problem when I tried to configure a BGP/MPLS VPN between 2
CEs.

	Everything seems to work fine but when I'm connected to PE1 I can
only see the routes coming from CE1 and when I'm connected to PE2 I can only
see the routes coming from CE2. I could not see the BGP routes to the
distant PE. When issuing the show ip bgp vpn all command I can see all the
routes but they are not imported into the approriate VRF table. 

	I'm using RSVP to establish the based tunnel and when I'm in PE1 I
can see traffic going accross the established LSP. 

	I have no idea what's wrong here 

Regards

David
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp