[j-nsp] M20 Problem, again

[Jared Gull]

Try this:

[edit]
root at router# run start shell pfe network ssb 

SSB platform (200/266Mhz PPC 603e processor, 64MB
memory, 256KB flash)

SSB0(router vty)# show syslog messages
SSB0(router vty)# show nvram

--- Ezequiel Carson <ezequiel at ifxnw.com.ar> wrote:

> Hi Jared:
> 
> 	the system has generated kernel.0 and vmcore.0 in
> /var/crash. except  
> this, no coredump was generated.
> 
> 	Im reading the /var/log/chassid and i found this
> with /trace/
> 
> 	"trace flags 7f00 trace file /var/log/chassisd size
> 3000000 cnt 5"
> 
> 	but im not  sure  if it's what you are looking for.
> 
> thanks
> ezequiel
> 
> 		
> On Jun 22, 2006, at 6:01 PM, Jared Gull wrote:
> 
> > Any core files generated (i.e. show system
> > core-dumps)?  Also, are you seeing any stack trace
> > info during this time frame in your 'show log
> > chassisd'?
> >
> > --- Elian Scrosoppi <escrosoppi at ifxcorp.com>
> wrote:
> >
> >> Hi Guys,
> >>
> >> Last week i had some problems with our M20 router
> >> when both RE and SSB crashed. Now this situacion
> >> happened again, but this new message appears in
> >> /var/log/info
> >>
> >> --
> >> Jun 22 20:26:24  JM20 savecore: Router
> crashed.....
> >> Jun 22 20:26:24  JM20 savecore: reboot after
> panic:
> >> replicated peer idx 5 addr 0x4 paniced
> >> Jun 22 20:26:24  JM20 savecore: system went down
> at
> >> Thu Jun 22 20:22:23 2006
> >> Jun 22 20:26:24  JM20 savecore: Selective dump
> will
> >> be saved now
> >> Jun 22 20:27:48  JM20 savecore: currently booted
> >> kernel copied
> >> Jun 22 20:27:48  JM20 savecore: writing kernel to
> >> /var/crash/kernel.1
> >> Jun 22 20:28:00  JM20 craftd[2776]: craftd
> detected
> >> platform m20
> >> etc..
> >> --
> >>
> >> Could this be the reason?
> >> --
> >> Jun 22 20:26:24  JM20 savecore: reboot after
> panic:
> >> replicated peer idx 5 addr 0x4 paniced
> >> --
> >>
> >> escrosoppi at JM20> show version
> >> Hostname: USMIANAPJM20x1B
> >> Model: m20
> >> JUNOS Base OS boot [7.0R2.7]
> >> JUNOS Base OS Software Suite [7.0R2.7]
> >> JUNOS Kernel Software Suite [7.0R2.7]
> >> JUNOS Packet Forwarding Engine Support (M20/M40)
> >> [7.0R2.7]
> >> JUNOS Routing Software Suite [7.0R2.7]
> >> JUNOS Online Documentation [7.0R2.7]
> >> JUNOS Crypto Software Suite [7.0R2.7]
> >>
> >> 2 SSB, 2 RE.
> >> --
> >> escrosoppi at JM20> show configuration chassis
> >> dump-on-panic;
> >> redundancy {
> >>     routing-engine 0 backup;
> >>     routing-engine 1 master;
> >>     ssb 0 preferred;
> >>     failover on-loss-of-keepalives;
> >>     graceful-switchover {
> >>         enable;
> >>     }
> >> }
> >>
> >> Any help or ideas will be appreciated.
> >>
> >> Thanks in advance,
> >> --
> >> Elian Scrosoppi
> >> escrosoppi at ifxcorp.com
> >>
> >>
> >> _______________________________________________
> >> juniper-nsp mailing list
> juniper-nsp at puck.nether.net
> >>
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> >>
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> > _______________________________________________
> > juniper-nsp mailing list
> juniper-nsp at puck.nether.net
> >
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> 
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com