[j-nsp] Guaranteeing Minimum bandwidth on BRAS profiles

[Nitin Tandon (GR/EIL)]

Hi

I this case you have 2 options

1. Create a rate limit policy in ERX

2. Use Juniper SDX to apply policies on ERX.

//BR
Nitin

 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
EmmanuelKwarteng
Sent: Thursday, March 09, 2006 3:05 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Guaranteeing Minimum bandwidth on BRAS profiles


Hi All,

I have an hiX 5300 dslam connecting to a BRAS (Juniper ERX) through an
atm backbone. The ERX is the edge router for my ADSL customers.

I have 3 different profiles created with the management software (
Access
Integrator) giving me 3 different categories of users.
I am able to give a peak bandwidth to each profile as follows:

profile 1:  256K
profile 2:  512K
profile 3:  1000K

I would like to guarantee a minimum bandwidth to each profile at least
to the BRAS and it's next hop. A sample minimum bandwidth for each
profile is as
follows:

Profile 1: 32K
profile 2: 64K
profile 3: 128K

Any suggestions as to how to do this?


Regards,

Kwarteng

--
System/ Network Engineer
GTnet/xDSL/NO
Ghana Telecom
+233202005526

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp