[j-nsp] Restart routing engine

[Sean Clarke]

Hi Damien


Nope. Once the RE is shutdown you cannot get too it from the other
routing engine

You'll just see ...

> request routing-engine login other-routing-engine

re1: No route to host
re1: No route to host

The only way is console, or power cycle.

Cheers
Sean
--

Not so long ago you wrote : 
MDD> Hi all,

MDD> When you halt a routing engine, the software goes down so you can't access
MDD> it anymore.
MDD> If you don't have console connection, you can't have the prompt "press a key
MDD> to restart" it.
MDD> So does someone knows if there is a command (even with the shell) to restart
MDD> a routing engine in halt state (from the other RE).

MDD> If both of the routing engine are halted, you can't recover from that state.
MDD> the only solution is power cycle or have console connection to both of them
MDD> right ?

MDD> Thanks a lot.
MDD> Dam
MDD> _______________________________________________
MDD> juniper-nsp mailing list juniper-nsp at puck.nether.net
MDD> http://puck.nether.net/mailman/listinfo/juniper-nsp